Monday, 27 September 2010

009 Modules

Modules

I've been sketching out some ideas for modules for an 009 modular system which is under development. All 3 modules could represent parts of my fictional modern Welsh narrow gauge network, but hopefully wouldn't look too specific to that region.

1. Is based on this bit of the WLLR. After drawing it I realised it might be better if the river didn't go over the ends of the modules as that would be hard to make look good, so I would change that if I built it.

2. Is based on the Aberglaslyn tunnels, with the line running between two tunnels. I'm assuming modules with backscenes that wrap around the module ends for this one, but it could have a short tunnel in the middle there weren't backscenes between modules.

3. A junction station which could be used either as a straight module, a corner module or as a junction module. There is double track leaving on the left end, but the rear track wouldn't continue if the next module didn't have double track. The platforms would be low (WHR style) and the road would be on a retaining wall behind the station. There might be houses in the top left, or I might make it two boards with the left hand board being narrower that the right. It's very loosely based on the idea that the Llanberis Lake Railway have extended to Caernarfon.

Oh, and if you're wondering what the beer is, it's Wells Bombardier.

Friday, 27 August 2010

A rainy Sunday afternoon

It was raining on Sunday afternoon, and rather than go swimming in a river with friends, I spent a while working on the pizza layout.  My two year old was fascinated and sat watching me, asking questions, and telling me what she thought I should add next.  Her ideas were surprisingly similar to some of my plans.  I spent a while cutting the polystyrene to get the shape of the cutting right.  It obviously made a difference as my wife looked at it and observed that "it looks like a landscape now".  Since last time I blogged about the pizza I've also added some card edging and started painting the bridge.  I think I've got the effect of mortar which has gone black with age, but I need dry brush the bricks, and possibly add some newer mortar.  Looking at some pictures of bridges shows that the bricks end up a variety of colours, browns, greens, dark greys and off white all featuring as well as some newer bricks which are still brick colour.  I was going to add a photo, but I've not managed to take one this week.  Hopefully I'll spend some more time building stuff next week and I'll post some pictures then.

Monday, 26 July 2010

Isle of Wight Railways

DSCF2647
Last summer we spent a week on the Isle of Wight and visited the Isle of Wight Steam Railway. We got a day rover which also allowed us to take a trip on the Island Line too. This was well worth doing as travelling on an old tube train through sunny green countryside was a memorable experience. We caught the Island Line from Smallbrook Junction to Brading, then back to Ryde Pier Head. After having a snack and watching the hovercraft coming in from Portsmouth we headed back to Smallbrook Junction for what was suppose to be a 10 minute wait for the steam train. Unfortunately the locomotive had problems and we had a 45 minute wait. This gave me the opportunity to take some more photos of the Island Line trains, and to chat to one of the volunteers who told us that they would like to extend the line to Ryde St John's Road by running over the Island Line's tracks. Apparently South West Trains are sympathetic to this plan as it would simplify their timetables by eliminating the need to stop at Smallbrook Junction, but I don't think there are any official plans in place yet. Once we were back at Havenstreet we had our lunch and looked round the station and museum, and workshops where there was a carriage being painted and a stripped down O2 class. I liked this retro-style poster for the L&B railway.

Here's a couple more photos, the rest are on Flickr in sets for the Isle of Wight Steam Railway and the Island Line.

DSCF2649DSCF2688

Wednesday, 12 May 2010

OO Module Mockup

A common suggestion when planning a layout is to build a small scale model as an aid to visualising what the completed model is going to look like.  Since I wanted to be able to visualise how a much space my theoretical continuous run set up would take in the lounge I decided that some full size module templates would be needed.  If I just wanted to see how much space they would take up I could have cut templates of of paper, but I wanted to see how sturdy a lightweight baseboard was likely to be, and see where it could be stored.  A few hours over a couple of afternoons with a knife, some corrugated cardboard and a glue gun gave me this.

DSCF3455.JPG

It's stronger than I thought it would be, and the real thing would have more bracing, so I don't think strength will be an issue.  Modules of this size would also be fairly light if made out of foamcore, and if they were made so that they could be stacked then it would be fairly easy to store a few on top of a wardrobe. 

Of course if I want a continuous run then I'll need some curved modules too, so I got out the lining paper and made a couple of templates.  A length of Flexitrack and an intermodal twin set proved that the curves will be tighter than I'd like, but I don't think they'll be so tight that I can't live with them.

DSCF3456.JPG

So in theory I think it could work. However I have a couple of reservations, the first is that I've only got a couple of scenic ideas for the curved modules, and I can't work out how I'd match these ideas up with the ideas I have for the straight modules. The second is the number of modules I'd need for a continuous run. If I make each curved module 60°, then that's 6 modules just to make a circle. If I add in two 3' long straight modules, I'll just have a big train set, with no sidings, so I think I need two 3' modules on each side of the oval. This puts me up to 10 modules, and I think the set-up and take down time, problems with board joins, and amount of room the set-up would take would mean I'd not play trains very often.

I've not got a great deal of modelling time at the moment, so I've a while to mull the options over. One option would be to build a single straight module to get my hand in, and then it could either be used as a photo diorama or be connected to some future project.

Tuesday, 11 May 2010

Narrow Gauge South 2010

DSCF3462.JPG

It's now just over a month since Narrow Gauge South, and I've finally got round to uploading the photos I took to Flickr!  We had a good day out, and had our first picnic of the year.  I didn't take many photos, since I spent most of the day carrying my 2 year old daughter around so that she could see the layouts.  Her favourite was Torreton (pictured above), and she spent a few minutes looking in the mine excitedly waiting for the train to pop out.  She had definite ideas about which layouts she wanted to see, and on one occasion pointed out a layout that I'd missed!

Particular highlights for me were the Clydach Valley Railway, an impressive fictional preserved railway which managed to pull of the 009 cliché of having stock from well known Welsh lines; Khan, an 009 portrayal of German military railways in Namibia, and finally seeing Dunbracken.  I also bought a couple of things, but more about that later.

Links:
Mick Thornton
Michael Campbell: Blog Post, Pictures.
Fairlight Works: Blog Part 1, Blog Part 2, Pictures
Jamie Warne

Tuesday, 4 May 2010

Sleeper stacks at Eastleigh

DSC01275

I took this photo last summer at Eastleigh Station. I'd seen these piles of sleepers as I passed through the station and noticed that they were high enough that the trains on the tracks behind them were completely hidden. I though it could be a good scene to recreate on a model railway so the next time I changed trains at Eastleigh I took some photos with my cameraphone. It could be used as a different way to disguise an exit to a fiddleyard, or the area behind the sleepers could be used as on-scene staging, i.e. an area that is partly hidden, where wagons can be replaced. Most of the sleepers have now been cleared away, but there are still a few, along with some piles of old ballast and plenty of Buddleja.

So am I going to build this scene? Well I'm not planning on designing a layout around it, but if I find myself building a layout where it would fit in then I might, though building the sleeper piles would take a lot of time and patience.

Wednesday, 28 April 2010

Linkdump: Spring 2010

I currently have just under 40 draft posts.  Part of the reason for this is that I kept dumping links of things I find interesting or useful into draft posts.  To tidy things up a bit I've decided to collect all the things I've found recently in one post, with short comments.

Dales Peak: Going, going, gone! - A neat stacking module designs (and some destruction).
Micro 009 layout plans by Ian Holmes, one of which is now under construction.
Cool chipped paint via @Scalescenes - using salt, hairspray and paint.
Phil's Workbench: Tea leaves as ballast - I think this would also work as leaf litter in the larger scales.
Strange Worlds: Flickr Stream and article via Model Railroaders Anonymous - realistic dioramas made out of unconventional materials.
Traeth Mawr Railway: Assembling the backboard - Huw's Ffestiniog inspired layout begins to take shape.
Mick's Projects: Dartmoor Farm - a farm building built from card & and manilla envelope.